Switch|TP-LINK|TL-SG105PP-M2|Desktop/pedestal|5x2.5GbE|TL-SG105PP-M2
<
>
<
>
Pildid on illustratiivsed. Nendel kujutatud toode võib erineda pakutavast või sisaldada tootekomplekti mittekuuluvaid osiseid.
VendorTP-LINK
Product codeTL-SG105PP-M2
Warranty
3 years
Price€123.40
Price (excl. VAT)€99.52
Delivery
1-3 workdays
Quantity1 pc
Inbank financing calculator
NB! Järelmaks on finantskohustus,
millega kaasnevad kulud. Tutvu tingimustega siin.
Telia financing calculator
NB! Järelmaks on finantskohustus,
millega kaasnevad kulud. Tutvu tingimustega siin.
ESTO financing calculator
NB! Järelmaks on finantskohustus,
millega kaasnevad kulud. Tutvu tingimustega siin.
Overview
TL-SG105PP-M2 is an unmanaged switch with 5 Gigabit ports that requires no configuration and provides 4 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af/at/bt compliant Powered Devices (PDs) at port 1-4. In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.
The 2.5G ports support automatic negotiation to 10Mbps/100Mbps/1Gbps/2.5Gbps according to the type of connected device and provide sufficient bandwidth to unlock the highest performance of 2.5G/Multi-Gigabit devices, including NAS, a personal workstation, 8K video stream, and 2.5G Wi-Fi 6 AP.
Power Over Ethernet
4 RJ45 ports (port 1 to port 4) of the switch support Power over Ethernet (PoE) function. They can automatically detect and supply power with those connected IEEE 802.3af/at/bt compliant Powered Devices (PDs).
Overload Arrangement
TL-SG105PP-M2 has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is ≥ 123 W*, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.
Intelligent Power Management
Priority (port 1 > port 2 > port 3 > port 4): This function will help protect the system when the system power is overloaded. For example, port 2, 3, and 4 is using 35 W respectively (maximum power per port is 60 W); the system power is 105W in total. If there is an additional PD inserted to port 1 with 23 W, and then the system will cut off the power of port 4 because of the overloaded power, this means port 1 will use 23 W respectively and port 2&3 will use 35 W, no power will be supplied to port 4.
Highlight Performance
- With PoE Auto Recovery, the switch will constantly detect the data transmission with PoE-powered devices (PD) for port 1-4. When the switch finds that a PD stops sending data packets to the switch for a long period, the switch will reboot it automatically.
- Provides super-fast connections to 2.5G NAS, Server, 2.5G PCIe Adapter/ NIC, gaming computer, 2.5G WiFi 6 AP, 8K video, and more.
- Auto-negotiation for 10Mbps/100Mbps/1Gbps/2.5Gbps connections provide optimal performance.
TL-SG105PP-M2 is easy to install and use. It requires no configuration and installation. With desktop and wall mountable design, outstanding performance and quality, the TP-Link 5-Port 2.5G Desktop Switch with 4-Port PoE++ TL-SG105PP-M2 is a great selection for expanding your network.
- 5× 10 Mbps/100 Mbps/1 Gbps/2.5 Gbps RJ45 ports
- With four PoE++ ports, transfers data and power on one single cable
- Works with IEEE 802.3af/at/bt type3 compliant PDs
- 802.1p/DSCP QoS enable smooth latency-sensitive traffic
- Supports PoE Power up to 60 W for each PoE++ port
- Supports PoE Power up to 123 W for all PoE ports*
- PoE Auto Recovery guarantees stable operation of PoE devices by automatically rebooting the dropped or unresponsive PD devices
- Plug and Play, no configuration and installation required
Summary:
TP-Link 5-Port 2.5G Desktop Switch with 4-Port PoE++. Switch type: Unmanaged. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 5. MAC address table: 4000 entries, Switching capacity: 25 Gbit/s. Networking standards: IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x. Power over Ethernet (PoE)
Vendor Homepage:
https://www.tp-link.com/sg/business-networking/unmanaged-switch/tl-sg105pp-m2/
Category Code:
SWI
Unit Box Height:
0.24
Unit Box Length:
0.32
Unit Box Width:
0.07
Quality of Service (QoS) support:
Yes
Switch type:
Unmanaged
2.5G Ethernet (copper) ports quantity:
5
Basic switching RJ-45 Ethernet ports quantity:
5
Basic switching RJ-45 Ethernet ports type:
Gigabit Ethernet (10/100/1000)
10G support:
No
Auto MDI/MDI-X:
Yes
Auto-negotiation:
Yes
Cable types supported:
Cat3/Cat4/Cat5/Cat5e
Copper ethernet cabling technology:
1000BASE-T/100BASE-TX/10BASE-T
Flow control support:
Yes
MAC address auto-aging supported:
Yes
MAC address auto-learning supported:
Yes
Networking standards:
IEEE 802.1p/IEEE 802.3/IEEE 802.3ab/IEEE 802.3u/IEEE 802.3x
Forwarding rate:
18.6 Mpps
MAC address table:
4000 entries
Store-and-forward:
Yes
Switching capacity:
25 Gbit/s
IGMP snooping:
Yes
Housing material:
Steel
LED indicators:
Yes
Product colour:
Black
Rack mounting:
No
Fanless:
Yes
AC input frequency:
50 Hz
AC input voltage:
220 V
Input current:
2.43 A
Input voltage:
53.5 V
Number of power supply units:
1
Power consumption (max):
143.37 W
Power source:
DC/PoE
Power supply included:
Yes
Power over Ethernet (PoE):
Yes
Power over Ethernet (PoE) power per port:
60 W
Power over Ethernet 4PPoE (PoE++) ports quantity:
4
Total Power over Ethernet (PoE) budget:
123 W
Heat dissipation:
488.89 BTU/h
Operating relative humidity (H-H):
10 - 90 %
Operating temperature (T-T):
0 - 40 °C
Storage relative humidity (H-H):
5 - 90 %
Storage temperature (T-T):
-40 - 70 °C
Depth:
126 mm
Height:
26 mm
Width:
209 mm
Cables included:
AC
User guide:
Yes
Package type:
Box
Certification:
CE, FCC, RoHS
Model name:
TL-SG105PP-M2
Units per Shipping Box:
1
Unit Calculated Volume:
0.005376 cubm
Unit Calculated Weight:
1.52 kg