Hismart Thermal Actuator, NC, 230V AC
<
>
<
>
Pildid on illustratiivsed. Nendel kujutatud toode võib erineda pakutavast või sisaldada tootekomplekti mittekuuluvaid osiseid.
TootjaHismart
TootekoodHT260492
Hind16,41 €
Hind (km-ta)13,23 €
Tarneaeg
5-7 tp
Kogus2 tk
Inbank järelmaksu kalkulaator
Tähelepanu! Järelmaks on finantskohustus,
millega kaasnevad kulud. Tutvu tingimustega siin.
Telia järelmaksu kalkulaator
Tähelepanu! Järelmaks on finantskohustus,
millega kaasnevad kulud. Tutvu tingimustega siin.
ESTO järelmaksu kalkulaator
Tähelepanu! Järelmaks on finantskohustus,
millega kaasnevad kulud. Tutvu tingimustega siin.
NC AC230V thermal actuator.
Features:Electric thermal actuator is designed for controlling the heat distribution equipment. It receives commands from automation devices (such as room thermostats or hub controller) and adjusts the water flow distribution according to set parameters. The thermal actuator allows precise control of room temperature and energy consumption.The thermal actuator is in NC (normally closed) state. The actuator works with any type of programmable or non-programmable room thermostats.Simple installation, the thermal actuators are connected to the manifold via a VA80 thread adapter. Valve thread adapter VA80 allows easy connection to standard thread M30, locking securely. Energy consumption of each drive is only 2W.
Technical specifications:Purpose: water heating system.Operating type: NC (normally closed).Operating voltage: AC 230V, 50/60Hz.Starting current: max. 300mA.Power consumption: 2W.Installation: connected to the collector via an adapter.Adapter: VA 80.Cable length: 90cm.Operating temperature: 0°C~ +60°C.Storage temperature: -25°C~ +65°C.Operating humidity: 80%RH (non-condensing).Safety class: IP54.Dimensions: Ø49.4mm x 56.6mm.
Warranty: 12 months.
Features:Electric thermal actuator is designed for controlling the heat distribution equipment. It receives commands from automation devices (such as room thermostats or hub controller) and adjusts the water flow distribution according to set parameters. The thermal actuator allows precise control of room temperature and energy consumption.The thermal actuator is in NC (normally closed) state. The actuator works with any type of programmable or non-programmable room thermostats.Simple installation, the thermal actuators are connected to the manifold via a VA80 thread adapter. Valve thread adapter VA80 allows easy connection to standard thread M30, locking securely. Energy consumption of each drive is only 2W.
Technical specifications:Purpose: water heating system.Operating type: NC (normally closed).Operating voltage: AC 230V, 50/60Hz.Starting current: max. 300mA.Power consumption: 2W.Installation: connected to the collector via an adapter.Adapter: VA 80.Cable length: 90cm.Operating temperature: 0°C~ +60°C.Storage temperature: -25°C~ +65°C.Operating humidity: 80%RH (non-condensing).Safety class: IP54.Dimensions: Ø49.4mm x 56.6mm.
Warranty: 12 months.