Peak Design kaamera kinnitusklamber Capture V3, hõbedane
<
>
<
>
Pildid on illustratiivsed. Nendel kujutatud toode võib erineda pakutavast või sisaldada tootekomplekti mittekuuluvaid osiseid.
TootjaPeak Design
TootekoodCP-S-3
Hind71,10 €
Hind (km-ta)57,34 €
Tarneaeg
2-4 tp
Kogus1 tk
Inbank järelmaksu kalkulaator
Tähelepanu! Järelmaks on finantskohustus,
millega kaasnevad kulud. Tutvu tingimustega siin.
Telia järelmaksu kalkulaator
Tähelepanu! Järelmaks on finantskohustus,
millega kaasnevad kulud. Tutvu tingimustega siin.
ESTO järelmaksu kalkulaator
Tähelepanu! Järelmaks on finantskohustus,
millega kaasnevad kulud. Tutvu tingimustega siin.
Take your camera out of CapturePRO and put it directly into your ARCA-type tripod with the included PROplate quick-release plate.
Clamps to any strap
Connects to any strap up to 6.4 cm (2.5”) wide and 2.2cm (0.88") thick
Carry any device
Carry binoculars, lenses, and GoPro cameras with additional plates/kits (sold separately)
Instant access
Instantly access camera with quick release button
Total security
Redundant security lock prevents accidental release
Tripod compatible
Includes Standard Plate, which works with most Arca-type tripods. Need Manfrotto® RC2 compatibility? Get Dual Plate Capture (Clip Only).
Fast lens changes
Camera locks into clip in 4 directions, enabling easier lens changes. Speed lens changes up even more with Lens Kit (sold separately)
Weatherproof & water friendly
All parts are weatherproof and resist rust and saltwater
New for V3
Way smaller
30% lighter, 20% narrower, 20% lower profile than Capture v2
All-metal build
Aluminum alloy chassis, backplate, quick-release button and stainless steel locking pin
Anodized finish
For increased durability and smoothness
Grippier
Embedded grip in backplate for maximum slip resistance
2 sets of bolts
Thumb-drive bolts for easy clamping and unclamping
Hex-drive bolts for more secure/permanent installation or thicker straps
Dimensions:
In the box:
Clamps to any strap
Connects to any strap up to 6.4 cm (2.5”) wide and 2.2cm (0.88") thick
Carry any device
Carry binoculars, lenses, and GoPro cameras with additional plates/kits (sold separately)
Instant access
Instantly access camera with quick release button
Total security
Redundant security lock prevents accidental release
Tripod compatible
Includes Standard Plate, which works with most Arca-type tripods. Need Manfrotto® RC2 compatibility? Get Dual Plate Capture (Clip Only).
Fast lens changes
Camera locks into clip in 4 directions, enabling easier lens changes. Speed lens changes up even more with Lens Kit (sold separately)
Weatherproof & water friendly
All parts are weatherproof and resist rust and saltwater
New for V3
Way smaller
30% lighter, 20% narrower, 20% lower profile than Capture v2
All-metal build
Aluminum alloy chassis, backplate, quick-release button and stainless steel locking pin
Anodized finish
For increased durability and smoothness
Grippier
Embedded grip in backplate for maximum slip resistance
2 sets of bolts
Thumb-drive bolts for easy clamping and unclamping
Hex-drive bolts for more secure/permanent installation or thicker straps
Dimensions:
- Clip: 83 × 40 × 20 mm, 70 g
- Plate: 38 × 38 × 7 mm, 14 g
In the box:
- 1 × Capture Clip
- 1 × Standard Plate
- 2 × hand drive bolts
- 2 × hex drive long bolts
- 1 × 4mm hex wrench
- 1 × microfiber pouch
Mobiilseadme tüüp:
Kaamera
Nõuetekohane kasutamine:
Belt, Outdoor
Product colour:
hõbedane
Tüüp:
Passive holder
Materjal:
alumiinium
Päritoluriigid:
China
Sisseehitatud kõlar (id):
Ei
Toiteallika tüüp:
Not supported
Laius:
30 mm
Sügavus:
125 mm
Kõrgus:
120 mm
Kaal:
166 g
© Icecat.biz