Tahvelarvutite dokid

Lisa ostukorvi

DICOTA Docking Station USB-C Portable 4-in-1 D ock 4K 2xHDMI 100W PD Tootekood: D32063

Lisa ostukorvi

Targus | USB-C DP Alt Mode Single Video 4K HDMI/VGA Docking Station with 100W PD Pass-Thru | DOCK419EUZ | VGA (D-Sub) ports quantity 1 | HDMI ports quantity 1 Tootekood: DOCK419EUZ

Tarneaeg 1-3 tp

64,00 €

Lisa ostukorvi

DELOCK Dockingstation USB Typ-C mobile 4K HDMI/Hub/LAN/ Tootekood: 87742

Tarneaeg 5-8 tp

75,90 €

Lisa ostukorvi

RAM Mounts GDS Uni-Conn Charging Dock - 2-Hole AMPS Pattern - USB-C Connector - Screw Set - The RAM Mounts GDS Uni-Conn Holder is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCK-U1CPU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output voltage: 5 - 12V @ 3A Input Cable Length: ca. 215 mm Product dimensions: Overall Width: 8.02 cm Overall Height: 21.44 cm Overall Depth: 7.70 cm Weight: ca. 223 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-U1CPU holder is supplied Tootekood: RAM-GDS-DOCK-U1CPU

Tarneaeg 5-8 tp

94,50 €

Lisa ostukorvi

RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (8") - This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE10PD2CLU:Compatible with the Zebra tablet accessoiresEasy insertion and removalPrepared for mounting additional devices such as handheldsLockable with combo-lockingInput Connector: 5.5mm DCOutput Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)Transfer Speed: 12MbpsAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE10PD2CLU holder is supplied Tootekood: RAM-HOL-ZE10PD2CLU

Tarneaeg 5-8 tp

163,00 €

Lisa ostukorvi

RAM Mounts RAM Tough-Dock for Zebra ET4x, 10" Tablet Tootekood: RAM-HOL-ZE21PU

Tarneaeg 5-7 tp

168,50 €

Lisa ostukorvi

RAM Mounts GDS EZ-Roll'r Holder for Zebra ET40/45 (8") - This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-ZE20PD2U:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AOutput Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)Transfer Speed: 12MbpsInput Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-ZE20PD2U holder is supplied Tootekood: RAM-GDS-DOCK-ZE20PD2U

Tarneaeg 5-8 tp

177,30 €

Lisa ostukorvi

RAM Mounts EZ-Roll'r Holder for Zebra ET40/45 (8") - This RAM Mounts EZ-Roll'r cradle is designed for the Zebra ET40 & ET45 (8-inch) with Zebra Rugged Boot, as well as the Zebra ET401 (8-inch) with RAM Skin.The Zebra ET401 can only be used in combination with the appropriate RAM protective case.The cradle is powered via a 5.5 mm DC connector and charges the device while docked. Peripheral devices are supported via the integrated dual USB-A ports.To dock the device, insert the bottom of the tablet into the cradle and push it into place until it clicks securely into position.The cutouts for buttons and ports ensure that they remain fully accessible and functional.Thanks to a cutout on the inside of the cradle, the tablet's scanning function remains fully operational. Additional tablet accessories, such as the PowerPack battery, can also be accommodated.The back of the cradle is designed to accommodate a VESA 75 x 75 mm mounting plate or a round base plate (not included).Product Features RAM Mounts RAM-HOL-ZE20PD2U:Compatible with PowerPack batteryEasy insertion and removalAdditional mounting plate for attaching extra devices or accessoriesOnly compatible with Zebra Rugged Boot or RAM Skin (ET401)Input connector: 5.5 mm DCOutput connectors: 2x USB-A 2.0 (peripheral devices – 900 mA per port)Data transfer speed: 12 MbpsInput cable length: approx. 100 cmOutput cable length: approx. 25 cmCertifications: RoHS, FCC, WEEE, CE & UKCAWeight: approx. 576 gAdditional Notes:The cradle can only be used in combination with a compatible RAM Skin or Zebra Rugged Boot protective case.For ET40 & ET45: Zebra Rugged BootFor ET401: RAM-SKIN-ZE44For use without the Rugged Boot, the RAP-INSERT-ZE20U accessory is required.This cradle is not compatible with IntelliSkin.For use with an IntelliSkin protective case, please use the RAM-GDS-DOCK-ZE20PD2U.Devices shown in the images are not included in the scope of delivery.Only the RAM-HOL-ZE20PD2U cradle is supplied Tootekood: RAM-HOL-ZE20PD2U

Tarneaeg 5-8 tp

188,80 €

Lisa ostukorvi

RAM Mounts Form-Fit Holder (key-locking) for Zebra ET40/45 (8") - This RAM Mounts EZ-Roll'r cradle is designed for the Zebra ET40 & ET45 (8-inch) with Zebra Rugged Boot, as well as the Zebra ET401 (8-inch) with RAM Skin.The Zebra ET401 can only be used in combination with the appropriate RAM protective case.The cradle is powered via a 5.5 mm DC connector and charges the device while docked. Peripheral devices are supported via the integrated dual USB-A ports.To dock the device, insert the bottom of the tablet into the cradle and push it into place until it clicks securely into position.The cutouts for buttons and ports ensure that they remain fully accessible and functional.Thanks to a cutout on the inside of the cradle, the tablet's scanning function remains fully operational. Additional tablet accessories, such as the PowerPack battery, can also be accommodated.The back of the cradle is designed to accommodate a VESA 75 x 75 mm mounting plate or a round base plate (not included).Product Features RAM Mounts RAM-HOL-ZE20PD2KLU:Compatible with PowerPack batteryEasy insertion and removalAdditional mounting plate for attaching extra devices or accessoriesOnly compatible with Zebra Rugged Boot or RAM SkinKey-lockableInput connector: 5.5 mm DCOutput connectors: 2x USB-A 2.0 (peripheral devices – 900 mA per port)Data transfer speed: 12 MbpsInput cable length: approx. 100 cmOutput cable length: approx. 25 cmCertifications: RoHS, WEEE, CE & UKCAWeight: approx. 740 gAdditional Notes:The cradle can only be used in combination with a compatible RAM Skin or Zebra Rugged Boot protective case.For ET40 & ET45: Zebra Rugged BootFor ET401: RAM-SKIN-ZE44For use without the Rugged Boot, the RAP-INSERT-ZE20LU accessory is required.This cradle is not compatible with IntelliSkin.For use with an IntelliSkin protective case, please use the RAM-GDS-DOCKL-ZE20PD2U.Devices shown in the images are not included in the scope of delivery.Only the RAM-HOL-ZE20PD2KLU cradle is supplied Tootekood: RAM-HOL-ZE20PD2KLU

Tarneaeg 5-8 tp

235,70 €

Lisa ostukorvi

Gamber-Johnson ZEBRA ET4X 10IN SLIM FULL PORT, REPLICATION DOCKING STATION Tootekood: 7160-1807-20

Tarneaeg 7-9 tp

341,40 €

Lisa ostukorvi

Panasonic FZ-VEBG21U - docking - 2 x HDMI - for Toughbook G2, G2 Standard Tootekood: FZ-VEBG21U

Tarneaeg 6-9 tp

459,49 €

Lisa ostukorvi

Panasonic Vechicle Dock KA (Dual Pass Through) (It does not come with any cables or adapters., purchased separately) Tootekood: PCPE-HAVG104

Tarneaeg 6-9 tp

771,80 €

Lisa ostukorvi

Panasonic Gamber-Johnson Vehicle Dock - G&J Vehicle and Forklift Dock - Tablet Dock Lite, without Dual-Pass-Through-Antenna, fits for: TOUGHBOOK 33 Tootekood: PCPE-GJ33V04

Tarneaeg 5-8 tp

1 091,20 €

Lisa ostukorvi

Panasonic Gamber-Johnson Vehicle Dock - G&J Vehicle and Forklift Dock - Tablet Dock, without Dual-Pass-Through-Antenna, fits for: TOUGHBOOK 33 Tootekood: PCPE-GJ33V02

Tarneaeg 5-8 tp

1 272,60 €

Lisa ostukorvi

Tahvelarvutite lisad | Dokkimisseadmed