Tahvelarvutite lisad | Kotid ja ümbrised

RAM-GDS-DOCK-ZE20PD2U tootepilt
RAM Mounts GDS EZ-Roll'r Holder for Zebra ET40/45 (8") - This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-ZE20PD2U:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AOutput Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)Transfer Speed: 12MbpsInput Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-ZE20PD2U holder is supplied Tootekood: RAM-GDS-DOCK-ZE20PD2U
Tarneaeg 5-8 tp
178,80 €
Lisa ostukorvi
RAM-HOL-ZE20PD2U tootepilt
RAM Mounts EZ-Roll'r Holder for Zebra ET40/45 (8") - This RAM Mounts EZ-Roll'r cradle is designed for the Zebra ET40 & ET45 (8-inch) with Zebra Rugged Boot, as well as the Zebra ET401 (8-inch) with RAM Skin.The Zebra ET401 can only be used in combination with the appropriate RAM protective case.The cradle is powered via a 5.5 mm DC connector and charges the device while docked. Peripheral devices are supported via the integrated dual USB-A ports.To dock the device, insert the bottom of the tablet into the cradle and push it into place until it clicks securely into position.The cutouts for buttons and ports ensure that they remain fully accessible and functional.Thanks to a cutout on the inside of the cradle, the tablet's scanning function remains fully operational. Additional tablet accessories, such as the PowerPack battery, can also be accommodated.The back of the cradle is designed to accommodate a VESA 75 x 75 mm mounting plate or a round base plate (not included).Product Features RAM Mounts RAM-HOL-ZE20PD2U:Compatible with PowerPack batteryEasy insertion and removalAdditional mounting plate for attaching extra devices or accessoriesOnly compatible with Zebra Rugged Boot or RAM Skin (ET401)Input connector: 5.5 mm DCOutput connectors: 2x USB-A 2.0 (peripheral devices – 900 mA per port)Data transfer speed: 12 MbpsInput cable length: approx. 100 cmOutput cable length: approx. 25 cmCertifications: RoHS, FCC, WEEE, CE & UKCAWeight: approx. 576 gAdditional Notes:The cradle can only be used in combination with a compatible RAM Skin or Zebra Rugged Boot protective case.For ET40 & ET45: Zebra Rugged BootFor ET401: RAM-SKIN-ZE44For use without the Rugged Boot, the RAP-INSERT-ZE20U accessory is required.This cradle is not compatible with IntelliSkin.For use with an IntelliSkin protective case, please use the RAM-GDS-DOCK-ZE20PD2U.Devices shown in the images are not included in the scope of delivery.Only the RAM-HOL-ZE20PD2U cradle is supplied Tootekood: RAM-HOL-ZE20PD2U
Tarneaeg 5-8 tp
190,50 €
Lisa ostukorvi