WURTH Nut M6-8 1.7-2.6mm
<
>
<
>
TootjaWURTH
Tootekood038161
Hind6,70 €
Hind (km-ta)5,40 €
Saadaval5+ tk
Tarneaeg4-6 tp
Inbank järelmaksu kalkulaator
Tähelepanu! Järelmaks on finantskohustus,
millega kaasnevad kulud. Tutvu tingimustega siin.
Telia järelmaksu kalkulaator
Tähelepanu! Järelmaks on finantskohustus,
millega kaasnevad kulud. Tutvu tingimustega siin.
ESTO järelmaksu kalkulaator
Tähelepanu! Järelmaks on finantskohustus,
millega kaasnevad kulud. Tutvu tingimustega siin.
WN 0381, steel, galvanised, blue passivated (A2K), without safeguard
- Used as internal connectors for sheet metal structures.
- Efficient installation by simply pressing in.
- Self-adhesive due to spring-steel nut holder.
- Variations in manufacturing tolerances are compensated for during installation by the longitudinal and lateral mobility of the nut in the nut holder.
- Can also be used in difficult installation conditions or tight spaces.
- Can be reused
Material | Steel |
Surface | Galvanised |
Thread type x nominal diameter (D) | M6 |
Max. width (b1) | 13.5 mm |
Max. length (a1) | 14.2 mm |
Height (h1) | 9.5 mm |
Min./max. material thickness | 1.7-2.7 mm |
Punched-hole width x punched-hole length (n) | 9.5 x 9.5 mm |
Dimensions of square cage nut (L x B x H) | 11 x 11 x 4.5 mm |
Min./max. length (a) | 13.6-14.2 mm |
Min./max. internal length (b) | 7.7-8.4 mm |
Nominal diameter | 6 mm |
Max. material thickness | 2.7 mm |
Min. length | 13.6 mm |
Max. internal length | 8.4 mm |
Min. internal length | 7.7 mm |
Internal width (f) | 9.3 mm |
Punched-hole length | 9.5 mm |
Version | Without assurance |
Min. width | 13 mm |