Moxa Konverter RS-232/422/485 > Multi Mode SC, 0 kuni 60°C

Moxa TCF-142-M-SC tootepilt
  • Moxa TCF-142-M-SC tootepilt 1

Pildid on illustratiivsed. Nendel kujutatud toode võib erineda pakutavast või sisaldada tootekomplekti mittekuuluvaid osiseid.

TootjaMoxa
TootekoodTCF-142-M-SC, MOXTFC142M1
Garantii 2 aastat
Hind218,29 €
Hind (km-ta)178,93 €
Tarneaeg3-5 tp
Kogus 2  tk
TransportTASUTA ÜLE EESTI!
ESTO
Telia
LHV

ESTO järelmaksu kalkulaator

Tähelepanu! Järelmaks on finantskohustus,
millega kaasnevad kulud. Tutvu tingimustega siin.

Telia järelmaksu kalkulaator

Tähelepanu! Järelmaks on finantskohustus,
millega kaasnevad kulud. Tutvu tingimustega siin.

LHV järelmaksu kalkulaator

Tähelepanu! Järelmaks on finantskohustus,
millega kaasnevad kulud. Tutvu tingimustega siin.

 

Features and Benefits 

  • “Ring” and “Point-to-Point” transmission
  • Extends RS-232/422/485 transmission up to:
    • 40 km with single-mode—TCF-142-S
    • 5 km with multi-mode—TCF-142-M
  • Compact size
  • Decreases signal interference
  • Protects against electrical interference and chemical corrosion
  • Supports baudrates of 50 bps to 921.6 Kbps 
  • Wide temperature models available (-40 to 75°C)

 

Introduction

The TCF-142 media converter is equipped with a multiple interface circuit that can handle RS-232 or RS-422/485 serial interfaces and multi-mode or single-mode fiber. TCF-142 converters are used to extend serial transmission up to 5 km (TCF-142-M with multi-mode fiber) or up to 40 km (TCF-142-S with single-mode fiber). The TCF-142 can be configured to convert either RS-232 signals, or RS-422/485 signals, but not both at the same time.

 

Automatic Baudrate Detection

The TCF-142 can automatically detect the serial baudrate. This is an extremely convenient feature. Even if a device’s baudrate is changed, the signal will still be transmitted through the media converter without any data loss.

 

Ring Operation

The TCF-142 converters can be used to connect serial devices to a fiber ring. To form the ring, connect the Tx port of one TCF-142 to the Rx port of a neighboring converter. Once the ring is set up, simply use the DIP switches to configure the TCF-142 converters for “ring mode.” When one node transmits a signal, the signal travels around the ring until it returns back to the transmitting unit, which then blocks the signal. With the TCF-142, you can set up fiber rings that have a total circumference of up to 100 km.

 

Automatic Data Direction Control (ADDC®)

ADDC® is a patented hardware data flow solution developed by Moxa to handle RS-485 data direction control. ADDC® senses and controls RS-485 data direction automatically, making it unnecessary to use the hand shaking signal.

Hostiliides:
RS-232/422/485
Väljundliides:
Fiber (SC)
RS-232-signaalid:
GND, Rx, Tx
Liigvoolukaitse:
Y
Surge protection voltage:
2 kV
Elektrostaatilise lahenduse (ESD) kaitse:
15 kV
Fiiberoptiline pistmik:
SC
Ülekandekaugus (multirežiim):
5 km
Lainepikkus:
850 nm
RS-422-signaalid:
RxD+, RxD-, SGND, TxD+, TxD-
RS-485-signaalid:
Data+, Data-, RxD+, RxD-, SGND, TxD+, TxD-
RX-tundlikkus:
-20 dB
TX-väljund:
-5 dB
Boodikiirus:
921.6 Kbit/s
Töötemperatuur:
0 - 60 °C
Säilitustemperatuur:
-40 - 85 °C
Operating relative humidity (H-H):
5 - 95%
Mõõdud (LxSxK):
67 x 100 x 22 mm
Sisendpinge:
12 - 48 V
Energiatarve:
140 mA
Sertifikaat:
EN, FCC
Ohutus:
UL/CUL, TUV
LED-indikaatorid:
Y
© Icecat.biz

Saada toode sõbrale